Canon MP390 Printhead (QY6-0054-000) Don't throw your Canon MP390 Printer away just because the printhead has failed, breathe a
new lease of life into it by changing the printhead.
Canon MP 390 Smartbase The Canon MP390 Smartbase delivers photo quality printing, fast flatbed Super G3 faxing and superb colour scanning and copying. It provides camera and card direct photo printing
The Smartbase MP390 printer uses a QY6-0054-000 Canon Printhead. Printheads are classified as spare parts and as such do not need to be replaced as often as the ink tanks inside the printer. Over a period of time the resistors in the printhead fail and the image quality deteriotes.
When should you replace the printhead?
The printhead does not need to be replaced each time the ink cartridges are replaced, only when print quality deteriotes and a head cleaning fails to resolves the problem, we suggest checking with Canon if you are unsure.
Fitting the QY6-0054-000 Printhead.
No special knowledge is required to fit the printhead and full detailed graphical instructions are included. Note: The printhead does not come with any ink tanks.
The Canon Smartbase MP390 uses the following ink cartridges: BCI-24Bk, BCI-24C.
After Installing your Printhead
You may need to perform a head cleaning routine after installation and the print head will need to be re-aligned, refer to your user manual on how to do this.
The list below is ordered by printer series and model number: