Canon MPC200 Printhead (QY6-0037-000) Don't throw your Canon MPC200 Printer away just because the printhead has failed, breathe a
new lease of life into it by changing the printhead.
Canon Smartbase MPC 200 The Canon Smartbase MPC200 copies and prints and can also print full-colour photos,
All-In-One device to offer direct photo printing and allows users to print photographs quickly and easily at home or in the workplace.
The Smartbase MPC200 printer uses a QY6-0037-000 Canon Printhead. Printheads are classified as spare parts and as such do not need to be replaced as often as the ink tanks inside the printer. Over a period of time the resistors in the printhead fail and the image quality deteriotes.
When should you replace the printhead?
The printhead does not need to be replaced each time the ink cartridges are replaced, only when print quality deteriotes and a head cleaning fails to resolves the problem, we suggest checking with Canon if you are unsure.
Fitting the QY6-0037-000 Printhead.
No special knowledge is required to fit the printhead and full detailed graphical instructions are included. Note: The printhead does not come with any ink tanks.
The Canon Smartbase MPC200 uses the following ink cartridges: BCI-24BK, BCI-24C.
After Installing your Printhead
You may need to perform a head cleaning routine after installation and the print head will need to be re-aligned, refer to your user manual on how to do this.
The list below is ordered by printer series and model number: